![]() Insert the USB flash drive into the system on which you want to run Home Assistant.Follow the Ubuntu instructions on writing an Ubuntu iso file onto a USB device.Create a live operating system on a USB flash drive:.Back up your data before carrying out this procedure.This means you will lose all the data as well as the previously installed operating system.Notice: This procedure will write the Home Assistant Operating System onto your device.To install HAOS via Ubuntu from a USB flash drive USB flash drive (USB thumb drive is sufficient, it should be at least 4 GB in size).The target x86-64 hardware, on which you want to install the Home Assistant Operating System (HAOS). ![]() Method 1: Installing HAOS via Ubuntu booting from a USB flash drive Required material If you have non-removable internal mediums (for example because you are using a laptop) or do not have the necessary adapter (for example an USB to S-ATA adapter) use method 1 instead. Method 2: With this method, you write the Home Assistant Operating disk image directly onto a boot medium from your regular computer. It also works on laptops and PCs with internal hard disks. Method 1 (recommended): Boot Ubuntu from a USB flash drive and install the Home Assistant Operating System from there. To write the HAOS image to the boot medium on your x86-64 hardware, there are 2 different methods: Alternatively, an external medium can be used such as a USB SDD, though this is not recommended. Typically, an internal medium like S-ATA hard disk, S-ATA SSD, M.2 SSD, or a non-removable eMMC is used for the x86-64 boot medium. You will write it manually using either the Disks utility from Ubuntu or Balena Etcher. HAOS has no integrated installer that writes the image automatically. Next, you need to write the Home Assistant Operating System image to the boot medium, which is the medium your x86-64 hardware will boot from when it is running Home Assistant. To enter the BIOS, start up your x86-64 hardware and repeatedly press the F2 key (on some systems this might be Del, F1 or F10). ![]() However, the options should still be present and named similarly. The BIOS menu will likely look different on your system. The following screenshots are from a 7th generation Intel NUC system. To boot Home Assistant OS, the BIOS needs to have UEFI boot mode enabled and Secure Boot disabled.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |